Network Tap
Also called TAP, test access point.
A hardware device that copies a link's traffic for monitoring.
What it is
A dedicated hardware device inserted inline on a network link that passively copies every passing frame to a monitoring port without altering the original flow. Unlike a switch mirror, it does not compete for switch resources.
Why it matters
Because a tap captures all traffic faithfully and does not drop frames under contention the way a mirror can, it is the preferred source for forensic-grade capture and reliable detection.
In practice
Installing a tap in front of a critical server so the captured PCAP would be complete enough to stand up as forensic evidence.
What to look for
- Taps placed where full traffic is visible.
- Monitoring ports that drop packets under load.
- Gaps when the tap or sensor goes offline.
Common mistake
Using a SPAN port for everything. SPAN can drop packets under load where a tap would not.
Practice it nearby
CyberKit has no tool for this term itself. These are the closest places to practice it.
- PCAP Triage
A first pass over a capture: conversations, protocol mix, DNS, HTTP hosts and TLS names.
- Network Case
A host suspected of beaconing: work its capture from scope to beacon, then the port recall and subnet math behind it.
- Rule Tester
Write a Sigma or YARA rule and test it against samples, or read a Suricata rule back in plain English.
In the field
Well-known tools where this shows up on the job. They are listed to show the landscape, not as a recommendation.
-
Wireshark Open source
Opens a capture packet by packet so you can see exactly what crossed the wire. Our notes.
-
Zeek Open source
Turns traffic into structured logs for connections, DNS, HTTP, TLS and more. Our notes.
-
Suricata Open source
An IDS that alerts on known patterns and logs protocol metadata alongside. Our notes.
-
Arkime Open source
Indexes full packet capture at scale so you can search and pull sessions later. Our notes.
Read next
- Packet Capture: Recording raw network frames off the wire for later analysis.
- Intrusion Detection System: A sensor that watches traffic and alerts on malicious activity.
- Deep Packet Inspection: Inspecting a packet's payload, past the headers, to identify content.